Detalhes dos processos

Para casa / Casos /

Casos de empresas sobre Why Do Instruments and Meters Need Lightning Protection Grounding?

Why Do Instruments and Meters Need Lightning Protection Grounding?

2026-11-06

Instrument lightning protection grounding is mainly to guard against induced lightning. When lightning strikes nearby, long cables act like antennas and induce instantaneous high voltage, which can break through the instrument's chips.

mais recente caso da empresa sobre Why Do Instruments and Meters Need Lightning Protection Grounding? 0
On-site damage commonly appears in three forms: data jumps, communication interruptions, and module burnout. The electronic components in industrial instruments typically have low voltage tolerance—a few thousand volts of surge is enough to cause a fault.

mais recente caso da empresa sobre Why Do Instruments and Meters Need Lightning Protection Grounding? 4
It mainly relies on three coordinated measures:
●SPD Current Diversion — Installed on power lines and signal lines, it quickly conducts when a surge arrives, directing the current to the grounding busbar.
●Equipotential Bonding — Bond the instrument housing, cable trays, pipes, and cabinets together. When lightning strikes, all components rise in potential together, reducing the risk of mutual breakdown.

mais recente caso da empresa sobre Why Do Instruments and Meters Need Lightning Protection Grounding? 8
●Shielding and Grounding — Metal cable trays, conduit pipes, and cable shielding layers must be continuously conductive and connected to a unified grounding system.

mais recente caso da empresa sobre Why Do Instruments and Meters Need Lightning Protection Grounding? 12
Where failures most often occur:
●Ground wires that are too long — SPD grounding wires should generally be kept within 0.5 meters. Excessive length generates additional voltage, and the residual voltage may exceed the instrument's tolerance.
●Focusing only on grounding resistance — A qualified resistance only indicates a good DC path. The connection path during a lightning strike is equally critical.

mais recente caso da empresa sobre Why Do Instruments and Meters Need Lightning Protection Grounding? 16
●Complete isolation of different grounds — During a lightning strike, a high potential difference can appear between different grounds, making equipment breakdown more likely.
●Cable trays broken midway — Loose connections, paint, or corrosion can break electrical contact, weakening the shielding effect.
So, effective lightning protection grounding means giving surges a short and reliable path while keeping all related metal parts at roughly the same potential.

mais recente caso da empresa sobre Why Do Instruments and Meters Need Lightning Protection Grounding? 20

15901050329

Ligação rápida

Para casa Sobre nós Produtos Casos Notícias download Vídeo Contacte-nos

Contato rápido

Endereço

Bloco V5, Cidade Industrial Ronghao, distrito de Gaoling, cidade de Xi'an, província de Shaanxi

Telefone

86--15901050329

E-mail

lijunrong@china-nyjy.com

15901050329

A nossa newsletter

Inscreva-se no nosso boletim informativo para obter descontos e mais.

Política de Privacidade | Mapa do site | China bom Qualidade Transmissor de nível de radar Fornecedor. Copyright © 2022-2026 Shaanxi Nuoying Automation Instrument Co., Ltd. Todos. Todos os direitos reservados.

Transmissor de nível de radar

Transmissor de Nível Ultrassônico

Transmissor de Nível Magnético

Transmissor de Nível de Admissão de RF

Medidor de Nível Magnetostritivo

Transmissor do Sensor de Pressão

Sensor do transmissor da temperatura

Medidor de fluxo eletromagnético

medidor de fluxo maciço

Medidor de fluxo ultrassônico

Medidor de fluxo da turbina

Chave de Nível do Diapasão

Interruptor de Nível de Admissão de RF

Interruptor de Nível da Pá Rotativa

Interruptor de Nível de Microondas

Interruptor de Nível de Líquido Externo

Medidor de densidade do diapasão